ccdba9490b
- add netmap (FreeBSD header files need to be updated with this) - move prototype perl scripts to prototype/ folder - create basic structure for sipcap app (no code yet)
105 lines
3.1 KiB
Plaintext
105 lines
3.1 KiB
Plaintext
diff --git a/e1000/e1000_main.c b/e1000/e1000_main.c
|
|
index bcd192c..5de7009 100644
|
|
--- a/e1000/e1000_main.c
|
|
+++ b/e1000/e1000_main.c
|
|
@@ -213,6 +213,10 @@ static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
|
|
|
|
+#if defined(CONFIG_NETMAP) || defined(CONFIG_NETMAP_MODULE)
|
|
+#include <if_e1000_netmap.h>
|
|
+#endif
|
|
+
|
|
/**
|
|
* e1000_init_module - Driver Registration Routine
|
|
*
|
|
@@ -375,6 +379,10 @@ static void e1000_configure(struct e1000_adapter *adapter)
|
|
e1000_configure_tx(adapter);
|
|
e1000_setup_rctl(adapter);
|
|
e1000_configure_rx(adapter);
|
|
+#ifdef DEV_NETMAP
|
|
+ if (e1000_netmap_init_buffers(adapter))
|
|
+ return;
|
|
+#endif /* DEV_NETMAP */
|
|
/* call E1000_DESC_UNUSED which always leaves
|
|
* at least 1 descriptor unused to make sure
|
|
* next_to_use != next_to_clean */
|
|
@@ -402,6 +410,10 @@ int e1000_up(struct e1000_adapter *adapter)
|
|
|
|
netif_wake_queue(adapter->netdev);
|
|
|
|
+#ifdef DEV_NETMAP
|
|
+ netmap_enable_all_rings(adapter->netdev);
|
|
+#endif /* DEV_NETMAP */
|
|
+
|
|
/* fire a link change interrupt to start the watchdog */
|
|
ew32(ICS, E1000_ICS_LSC);
|
|
return 0;
|
|
@@ -485,6 +497,10 @@ void e1000_down(struct e1000_adapter *adapter)
|
|
ew32(RCTL, rctl & ~E1000_RCTL_EN);
|
|
/* flush and sleep below */
|
|
|
|
+#ifdef DEV_NETMAP
|
|
+ netmap_disable_all_rings(netdev);
|
|
+#endif /* DEV_NETMAP */
|
|
+
|
|
netif_tx_disable(netdev);
|
|
|
|
/* disable transmits in the hardware */
|
|
@@ -1035,6 +1051,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
|
|
adapter->wol = adapter->eeprom_wol;
|
|
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
|
|
|
|
+#ifdef DEV_NETMAP
|
|
+ e1000_netmap_attach(adapter);
|
|
+#endif /* DEV_NETMAP */
|
|
+
|
|
/* print bus type/speed/width info */
|
|
DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
|
|
((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
|
|
@@ -1113,6 +1133,10 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
|
|
|
|
kfree(adapter->tx_ring);
|
|
kfree(adapter->rx_ring);
|
|
+
|
|
+#ifdef DEV_NETMAP
|
|
+ netmap_detach(netdev);
|
|
+#endif /* DEV_NETMAP */
|
|
|
|
iounmap(hw->hw_addr);
|
|
if (hw->flash_address)
|
|
@@ -1291,6 +1315,10 @@ static int e1000_open(struct net_device *netdev)
|
|
|
|
netif_start_queue(netdev);
|
|
|
|
+#ifdef DEV_NETMAP
|
|
+ netmap_enable_all_rings(netdev);
|
|
+#endif
|
|
+
|
|
/* fire a link status change interrupt to start the watchdog */
|
|
ew32(ICS, E1000_ICS_LSC);
|
|
|
|
@@ -3429,6 +3457,10 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
|
|
unsigned int count = 0;
|
|
unsigned int total_tx_bytes=0, total_tx_packets=0;
|
|
|
|
+#ifdef DEV_NETMAP
|
|
+ if (netmap_tx_irq(netdev, 0))
|
|
+ return 1; /* cleaned ok */
|
|
+#endif /* DEV_NETMAP */
|
|
i = tx_ring->next_to_clean;
|
|
eop = tx_ring->buffer_info[i].next_to_watch;
|
|
eop_desc = E1000_TX_DESC(*tx_ring, eop);
|
|
@@ -3795,6 +3827,11 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
|
|
bool cleaned = false;
|
|
unsigned int total_rx_bytes=0, total_rx_packets=0;
|
|
|
|
+#ifdef DEV_NETMAP
|
|
+ ND("calling netmap_rx_irq");
|
|
+ if (netmap_rx_irq(netdev, 0, work_done))
|
|
+ return 1; /* seems to be ignored */
|
|
+#endif /* DEV_NETMAP */
|
|
i = rx_ring->next_to_clean;
|
|
rx_desc = E1000_RX_DESC(*rx_ring, i);
|
|
buffer_info = &rx_ring->buffer_info[i];
|